Loading braid onto spool ?

[zippie01]

Please can someone give me some braid advice ?? I've been told that I should soak the spool of braid before putting it on reel, is this right or can I spool it straight on ??

[Steve Duffy]

I do this with braid or mono. Put spool in large pan of water and run line through bottom section of rod to reel.Wind a way using thumb to control line.Putting spool in water stops the spool running out of control and it beds the line in nicely.

[Tombod]

Cant see any reason for soaking it Zippie, I've got it on about 8 spools some on fixed spools and some on my boat multi,s and just spooled it strait on, never ever had a problem.
I have read that some people put a bit of tape on the spool to bed the braid in to stop it slipping but mine went straight on.
Not sure about beach multi,s as I don't use them with braid.
Tom.

[Tombod]

I do this with braid or mono. Put spool in large pan of water and run line through bottom section of rod to reel.Wind a way using thumb to control line.Putting spool in water stops the spool running out of control and it beds the line in nicely.

The problem I find with that Steve is that the line doesn't come off the spool the right way and it twists in the bucket, id rather have someone hold the spool facing the right way and keep the right tension, its just the way I have always done it. but if it works for you it must be O.K. you've never had a problem.

[Steve Duffy]

I do this with braid or mono. Put spool in large pan of water and run line through bottom section of rod to reel.Wind a way using thumb to control line.Putting spool in water stops the spool running out of control and it beds the line in nicely.

The problem I find with that Steve is that the line doesn't come off the spool the right way and it twists in the bucket, id rather have someone hold the spool facing the right way and keep the right tension, its just the way I have always done it. but if it works for you it must be O.K. you've never had a problem.

Never had any problem Tom.I find the line finds the right way that it wants to come off the spool.I saw a demo of it years ago on line and I've done it that way ever since.I also add a bit of washing up liquid to the water as this helps to degrease the mono or braid.

[Tombod]

I do this with braid or mono. Put spool in large pan of water and run line through bottom section of rod to reel.Wind a way using thumb to control line.Putting spool in water stops the spool running out of control and it beds the line in nicely.

The problem I find with that Steve is that the line doesn't come off the spool the right way and it twists in the bucket, id rather have someone hold the spool facing the right way and keep the right tension, its just the way I have always done it. but if it works for you it must be O.K. you've never had a problem.

Never had any problem Tom.I find the line finds the right way that it wants to come off the spool.I saw a demo of it years ago on line and I've done it that way ever since.I also add a bit of washing up liquid to the water as this helps to degrease the mono or braid.

[zippie01]

Cheers guys.

Someone else has told me, as well as soaking the line, reel it onto one spool first then onto the spool I want to use, so the line goes on the reel like it was on the spool !!!

I suppose different people have different methods !

[Steve Duffy]

Cheers guys.

Someone else has told me, as well as soaking the line, reel it onto one spool first then onto the spool I want to use, so the line goes on the reel like it was on the spool !!!

I suppose different people have different methods !

Simple is best.......a bit like me.

[Shaun1118]

I use the bucket of water method for braid As I think it helps to with getting the braid to bed down tight. I use my hand that supports the rod to keep tension on the line by wearing a soft glove and running the braid between my fingers. Spools without some sort of 'key' to grip the braid will need backing of some sort, on a spinning reel I just use one turn of electrical tape and on larger spools I just use the last bit of mono on a spool.

For mono I get someone to the spool.

[tatch1]

No need to soak it just make sure its wound on tight a bit of very good info on loading brad here http://www.avetreels.net/BRAIDED_LINE_PRECAUTIONS.html

[Steve Duffy]

No need to soak it just make sure its wound on tight a bit of very good info on loading brad here http://www.avetreels.net/BRAIDED_LINE_PRECAUTIONS.html

I agree Tatch,no need to soak it,but putting it in a pan of water helps to control it if you're on yer own.

[Bobdeniro2]

Don't forget to stand on one leg while doing it though

[tatch1]

Don't forget to stand on one leg while doing it though

Aye must be the middle leg though

[zippie01]

I managed to get it done last night. Soaked in soapy water then spooled on (after tying through holes provided on Penn braid reel) using one of these !!

[Steve Duffy]

Far too posh for this site.