Crimps

[blankman]

Hello all,

Is it o.k to use thin nose pliers to secure crimps or do i need to buy the special crimp pliers?

[mad mark]

I use normal pliers but you must be careful you dont squeeze too hard at the ends of the crimp as it will cut into the line but i supose crimping pliers would be better especially when making stronger traces

[blankman]

At the ends of the crimp! I crimp in the middle of em?

[mad mark]

Iusually crimp the whole length of the crimp upto about 2mm from each end wheather thats right or not i dont know but it seems to work ok

[Simon]

If using a crimp to hold a swivel in place, I'll just nip the middle gently. Hard enough to hold it in place, but soft enough that you can slide the crimp.

If I'm making up 100lb mono type rigs with double crimps to secure the hook etc on then I'll use crimping pliers.

cheers
Simon

[Steve Duffy]

Instead of crimps,try tying stopknots with powergum.

[wfsangler]

i lighty crimp twice in the middle, crimp once, rotate 90 degrees crimp again, with cheapo crimpin pliers.

i also like to use soft mini cripms. i find they look much neater and more stremlined

[mocksqueek]

ROUND NOSE PLIERS.

[Steve Duffy]

Round nose pliers..

A post brought back to life after 8 years Lazarus would be impressed.

[Big Kev]

[lese0025]

try breakaway coil crimps they don't require pliers.

[wobbler72]

I don't use crimps, except on my Tope rigs.

Try silicon tube, way more flexible